 |
 |
 |
 |
 |
Available |
|
|
Please contact the office to check pricing and availability as most of these listings are owned by our customers and dealers and may not be current. The listing number is the date when it was entered on the site. |
|||||||||
|
———————————————————————————— |
|||||||||
11302008 MCP250 Concrete Pulverizer new, fits any 40-70,000 lb machine, approx wgt 4,710 lbs, 3x4 tine configuration - $13,900. 
click here for more info
|
|||||||||
11302008 LW300 Concrete Pulverizer fits any 45-80,000 lb machine, approx wgt 4,200 lbs, 3x4 tine configuration, teeth and bottom plates made of AR450 harden steel - $18,900.   
click here for more info
|
|||||||||
08242010 LW200 Concrete Pulverizer - $12,900. 
 
|
|||||||||
08192010 MCP250 Concrete Pulverizer used mechanical concrete pulverizer - $11,900.     |
|||||||||
| 06052009 WCP Concrete Pulverizer for a 50 ton machine, weighs 7000 lbs - P.O.R. NOTE: Large concrete pulverizers are available, including one which weighs 11,000 lbs and opens 44 inches 
|
|||||||||
06092009 E-Crusher Concrete Pulverizer model C680 - $25,900. 
click here for more info
|
|||||||||
10192009 A1 400 Concrete Pulverizer unused mechanical Concrete Pulverizer, can be set up to fit most 80-100k excavators - $21,900.   
click here for more info |
|||||||||
10192009 LW300 Concrete Pulverizer used mechanical CP, can be set up to fit most 50-75k excavators, AS IS fob NY - $12,900. factory recondition option: $15,900., fob NY  
click here for more info |
|||||||||
07202010 Labounty CP60 mechanical concrete pulverizer for most 30 ton excavators, with 90mm pins, stiff arm and base plate included, fob NJ - $14,900. 
|
|||||||||
04302010 LaBounty PC650 Concrete Crusher - P.O.R. 
|
|||||||||
04092010 Crush-All CR-75 impact crusher, bought new in 2008, used 2 hours, plumbed for 200 size hoe - P.O.R. 
 
|
|||||||||
| 04092010 Nye EX800 Pulverizer in new condition, very few hours - P.O.R. | |||||||||
| 04082010 CAT P60 hydraulic concrete crusher - $ 41,000. | |||||||||
| 07022009 Concrete Pulverizer set up for Komatsu PC400 - P.O.R. | |||||||||
11102009 NYE Concrete Pulverizer reconditioned unit, for 100,000 lb machine -
$ 28,000.
|
|||||||||
11102009 NYE Concrete Pulverizer series 6, set up for PC400 - $ 25,000.
|
|||||||||
| 07022009 NYE Concrete Pulverizer 2 new units, one to fit CAT 330 and one to fit a 400 - P.O.R. | |||||||||
| 06142009 NYE Concrete Pulverizer for Komatsu PC400? - P.O.R. | |||||||||
| 03182009 NYE Concrete Pulverizer new unit, for CAT 365 - P.O.R. | |||||||||
| 03182009 LaBounty Concrete Pulverizer for CAT 345 - P.O.R. | |||||||||
04202008 WCP Pulverizer quick hitchable concrete pulverizer, for 20 tonne machines - P.O.R.  
|
|||||||||
12102008 NPK Concrete Cracker model H26X, 360 rotation - $ 19,900.
|
|||||||||
12102008 BTI CR2 Concrete Processor fits 4500lb-9000lb excavators, also fits skid steer loaders - $ 10,900.
|
|||||||||
| 04102008 NYE Concrete Pulverizer set up for a Komatsu PC400 - $ 23,000. | |||||||||
02282008 LW300 Concrete Pulverizer Demo mechanical concrete pulverizer, slightly used, new hard-facing from the factory, set up with 90mm pins and 16.25 opening - $15,900.SOLD   
|
|||||||||
01142008 NYE Concrete Pulverizer set up for a CAT 245, 5" main pin, 5" rear pin, 16 1/4" stick width, with 5" pins, spacers, stiff arm, mounting bracket and ripper shank included - $ 29,000. 
|
|||||||||
01092008 Concrete Cruncher with rebar cutter - P.O.R. 
|
|||||||||
05092006 Excavator Jaw Crushers new and used units, contact Percy Ransome - P.O.R.   
click here for more info
|
|||||||||
|
|||||||||
| 02072006 RCP200 Concrete Pulverizer Series 3, carrier wgt 40-60,000 lbs - $14,900. | |||||||||
| 02072006 RCP300 Concrete Pulverizer Series 3, carrier wgt 60-75,000 lbs - $17,900. | |||||||||
| 02072006 RCP400 Concrete Pulverizer Series 3, carrier wgt 75-95,000 lbs - $21,900. | |||||||||
01312006 Concrete Pulverizer slightly used, with 80 mm pins - $11,900.  
|
|||||||||
12162005 A1 300 Concrete Pulverizer set up for PC400, near new - $16,900.   
|
|||||||||
12112005 A1 Concrete Cracker jaw has reversible steel shear blades at the pivot and concrete teeth on the outer half - $21,500 
|
|||||||||
05172005 A1 Series Concrete Pulverizer can be set up for any 50-70,000 lb machine - $17,900.   
|
|||||||||
| 05182009 LaBounty CP 60 for Komatsu PC200, completely redone - $21,500. | |||||||||
| 04102008 LaBounty CP 60 set up for CAT 320 or Komatsu PC200 - $21,500. | |||||||||
01272010 LaBounty CP 80 set up for a CAT 330, fob NJ - $22,000.
|
|||||||||
08262009 Labounty CP80 - $ 19,000.
|
|||||||||
06242009 LaBounty CP 80 with D linkage (330C) - $27,900.       
|
|||||||||
| 05262009 LaBounty CP 80 for CAT 330, completely rebuilt - $22,000. | |||||||||
| 05042009 LaBounty CP 80 for CAT 330, welded teeth - $17,000. | |||||||||
| 05042009 LaBounty CP 80 for CAT 330, replacement teeth that are welded in - $21,900. | |||||||||
| 04102008 LaBounty CP 80 set up for Komatsu PC300 - $29,000. | |||||||||
| 02222008 LaBounty CP 80 mechanical concrete pulverizer, set up for a PC300 - $27,500. | |||||||||
| 02132008 LaBounty CP 80 reconditioned factory rebuild - $28,900. | |||||||||
01262010 LaBounty CP 100 set up for a CAT 235, fob NJ - $11,500. 
 
 
|
|||||||||
12082009 LaBounty CP 100 to fit CAT 345, multi lug - $31,000. 
|
|||||||||
11102009 LaBounty CP 100 set up for CAT 345 or PC400 but can be modified, with replaceable teeth - $29,000. 
|
|||||||||
11102009 LaBounty CP 100 nice condition, with replaceable teeth - $31,000. 
|
|||||||||
| 01222008 LaBounty CP 100 - $29,000. | |||||||||
| 01092008 LaBounty CP 100 - P.O.R. | |||||||||
09172007 LaBounty CP 100 2000 unit, set up for Komatsu PC400LC - P.O.R.  
|
|||||||||
| 11232008 LaBounty CP120 2 units - P.O.R. | |||||||||
| 11232008 LaBounty CP120 - P.O.R. | |||||||||
| Return to Top | |||||||||
|
Please contact the office to check pricing and availability as most of these listings are owned by our customers and dealers and may not be current. The listing number is the date when it was entered on the site. |
|
———————————————————————————— |
11302008 MSS250 Stump Splitter - $ 13,900.   
click here for more info
|
04092010 Stump Splitter - P.O.R.
|
10282009 Stump Splitter model MSS250, used 20 hours -
$ 11,900.
 
|
07072009 Firewood Splitter firewood processing attachment, including processing head, hoses, and control cable, 4-way wedge, length: 120, weight: 2020 lbs - P.O.R. 
|
01282010 Stump Splitter - P.O.R.
 
|
01282009 CBI Stump Shear 2004 CBI (Continental Biomass Industries), has very little wear, almost new condition, fits Hitachi EX330 excavator, pin bosses can be modified to fit any 330 size machine, weighs approx. 6,000 lbs, shear assembly only, no cylinder, cylinder mount plates or hydraulics included. - P.O.R.
SOLD
|
| 04102008 Dymax Tree/Stump Shear fits M318/320, 16", 8omm pins - $ 17,900. |
| 04102008 Bodine Tree Shear fits 315 - $ 6,900. |
01042008 Tree Shear Model HT - $ 6,900. 
|
01042008 Tree Shear Model TBL1000 - $ 4,995. 
|
11162007 KSC 3000 for a CAT 330CL - $ 19,900.  
|
10182007 Stump Ripper - P.O.R.  
|
08062007 Stump Puller with optional rake - $5,900. 
|
06142007 Stump Splitter has new pins and bushings, set up for 60-90,000 lb machine, cleaned and newly painted; NOTE: new pictures will be displayed when available - $ 12,900. SOLD 
|
| 05312007 Stump Puller weighs 1200 lb - $3,900.
|
05252007 Tree Shear unit has an opening of 27, throat to tip measurement is 22, blades are 8 long - $ 6,900   
  
|
| 01032007 LaBounty MWS 40 new unit - $31,900. |
01032007 LaBounty MWS 40 used - $27,900.    |
08302005 Handy Hatchet Tree Shear - $ 6,900   
|
| Return to Top |
———————————————————————————— |
Shears | Shear/Machine Combos | Universal Processors | Pulverizers/Stump Splitters | Clamshells | Orange Peels Grapples | High Reach Excavators | Long Reach Excavators | Long Reach Packages | Specialty Machines BIG Excavator Buckets | Used Buckets | Miscellaneous | Construction Equipment |
|
| Ransome Equipment Sales, LLC |
| 5118 Church Road · Mt. Laurel · NJ · 08054 |
| Toll Free Phone: 888-726-7863 · Phone: 856-778-4070 · Fax: 856-778-4249 |
| E-mail: sales@ransome-equip.com |
| Revised: 08/24/2010 |
